Buyer checklist

Squid, cuttlefish and octopus: six defects to check before you pay

Two cephalopod lots we have followed drew buyer claims. This page turns what we learned into questions you can put to your supplier’s documents and to the third-party report. No parties or shipments are named.

Scope. As-is reconciliation, not quality confirmation. The checklist tells you what to ask; it does not tell you the product is good or bad.
1

Colour and discoloration

Colour that departs from the agreed description (a reddish or pinkish tone, yellowing, dark patches) is a common point of complaint on squid, cuttlefish and octopus.

Ask the documents
Does the PO describe colour for the form you buy (skin-on, skinless, tubes, rings)? Does the surveyor’s report record colour against that description, with dated photographs that show lot and carton marks? Is there a gap in time between loading and the first discharge check?
What we reconcile
The PO description against the report’s wording and photographs, and any difference between loading and discharge records.
What we cannot conclude
Why the colour changed, or whether the product is acceptable.
2

Off-taste: sourness, astringency, ammonia note, salt uptake

Taste and odour complaints (sour, astringent, ammoniacal, salty) usually surface after discharge, when the product is cooked or tested.

Ask the documents
Does the PO set an organoleptic standard, and name the method (such as a cook test) and who performs it? Does the laboratory file cover the freshness indicators you require, with the limit and the accredited laboratory named on the certificate? Is any soaking or brine step declared, and does the specification limit it?
What we reconcile
The laboratory certificate and any declaration against the PO fields; gaps where an indicator you require is not reported.
What we cannot conclude
Whether a taste defect exists. NexVina does not taste or test product.
3

Over-glazing and net weight

Heavy glaze lowers the product you actually receive. In an FDA collection of imported frozen seafood, 12 of 26 samples (46%) were short in weight, by 1.42%–32.75% (collected May 20 – Sep 25, 2025). Sources: U.S. FDA; SeafoodNews; accessed 4 Nov 2026.

Ask the documents
Does the PO state a glaze limit and the method to measure it? Is the price on net weight after deglazing? Does the survey report give sample size, glaze and net weight per carton, and is the packing list on the same basis?
What we reconcile
Glaze and net weight in the PO, the PI, the packing list and the surveyor’s report, side by side.
What we cannot conclude
The true net weight of the lot.
4

Ink sac and viscera residue

Residue of ink sac or viscera in cleaned cephalopods is a defect buyers raise on arrival.

Ask the documents
Does the specification define the cleaning standard (ink sac removed, no viscera residue) and a tolerance? Does the survey checklist state how many cartons were opened and show photographs of cut samples?
What we reconcile
The specification wording against the checklist, the number of cartons opened and the photographs supplied.
What we cannot conclude
The condition of cartons that were not opened.
5

Size and count

Size grade drives price. A grade defined only by a name leaves room for dispute.

Ask the documents
Is the grade defined as pieces per kilogram or per carton, or as a weight range, with a tolerance for mixed sizes? Do the PO, PI, packing list and survey report use the same grade and the same counting method?
What we reconcile
Grade, count and carton weight across all four documents.
What we cannot conclude
The size distribution of cartons that were not counted.
6

Temperature history

A cold-chain break is hard to prove afterwards without a logger record.

Ask the documents
What temperature does the specification require at loading and in transit, and what is the reefer set point? How many data loggers are placed and where? Who provides the downloaded log, and when did it start relative to loading?
What we reconcile
The logger record and the set point against the specification, and the timing of the first reading.
What we cannot conclude
The actual core temperature of the product. NexVina does not measure it.

Put the six points in your PO.

GL-01 checks that your PO, the PI and your specification fields address each of them before you sign.

See GL-01